| Mounting Bracket |
The UniFi nanoHD Access Point features a low-profile form factor. The optional ceiling mount or custom skins allow the AP to blend even more discreetly into its setting. The UniFi nanoHD Access Point features a low-profile form factor. The optional ceiling mount or custom skins allow the AP to blend even more discreetly into its setting. Low-profile mounting accessory is sold separately Buy Now. The closest nanoHD is mounted on the ceiling about 10-15 feet away from my desktops antennas. As a test, I pulled files from my NAS (RAID 1+0), Windows 10 reports 120.6 MB/s (about 965mbps) over WiFI. Windows 10 reports the WiFi connection as 1733 Mbps. The NAS and the nanoHD's are connected to a EdgeSwitch es-8-150w.
| Screws (Qty. 4) |
| Keps Nuts (Qty. 4) |
| Gigabit PoE* (48V, 0.3A) with Mount Bracket |
* Included only in the single-pack of the UAP-nanoHD.
- CAT5 cable
- Phillips screwdriver
- Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
- Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
IMPORTANT: The UAP-nanoHD requires the UniFi Controller v5.7 or higher, available at: ui.com/download/unifi |
System Requirements
- Microsoft Windows 7/8/10, Mac OS X, or Linux
- Java Runtime Environment 1.8 (or above)
- Web Browser: Google Chrome (Other browsers may have limited functionality.)
- UniFi Controller software v5.7 or higher (available at: ui.com/download/unifi)
LED
Ports
Locking Notch |
|---|
The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. (This is described further in the Mounting Bracket section.) |
Reset |
The Reset button serves two functions for the UniFi AP:
|
Ethernet |
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. |
Cable Feed Plug |
If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug. |
Unifi Ap Nanohd Mesh
Mounting Bracket
Locking Tab | |||
|---|---|---|---|
During installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft.
|
The device can be mounted on the wall or ceiling. Perform the steps for the appropriate installation.
Wall Mount
Optional
Ceiling Mount
The UAP-nanoHD features auto-sensing 802.3af PoE support and can be powered by any of the following:
- Ubiquiti UniFi Switch with PoE
- 802.3af PoE compliant switch
- Ubiquiti Gigabit PoE Adapter (48V, 0.3A)
The single-pack of the UAP-nanoHD includes one Gigabit PoE adapter. For multi-pack units, PoE adapters or a UniFi Switch with PoE may be purchased separately.
Connecting to a PoE Switch
Connect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port on the switch.
UAP-nanoHD | |
Dimensions | 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29') |
|---|---|
Weight
| 300 g (10.6 oz)
|
Networking Interface | (1) RJ45 GbE |
Buttons | (1) Reset to Defaults |
Power Method | 802.3af |
Power Supply | 48V, 0.3A Gigabit PoE Adapter* |
Max. Power Consumption | 10.5W |
Operating Frequency | 2.4 GHz 5 GHz |
Max. TX Power
|
|
Antenna Gain
|
|
MIMO
|
|
Radio Rate
|
|
Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 |
Wireless Security | WEP, WPA-PSK, |
BSSID | 8 per Radio |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 to 70° C (14 to 158° F) |
Operating Humidity | 5 to 95% Noncondensing |
Certifications | CE, FCC, IC |
Unifi Ap Nanohd
* Only the single-pack of the UAP-nanoHD includes a PoE adapter.
Operating Frequency (MHz) | ||
US/CA | 2400 - 2483.5 | |
|---|---|---|
U-NII-1 | 5150 - 5250 | |
U-NII-2A | 5250 - 5350 | |
U-NII-2C | 5470 - 5725 | |
U-NII-3 | 5725 - 5850 | |
Worldwide | 2400 - 2483.5 | |